Classic Bike Tour 22 September 2012

From Robert Overdijk in Holland:

Although I missed out on the Superbikes at the Nurburgring as the tickets were all sold out, I had a great day riding 7 classic bikes recently.

Last Saturday (22/9) I went on a ride with Hans Koopman, he was the 1989 125cc GP Champion and now organises (as a hobby during the summer months) bike tours on his own collection of bikes (www.classicbiketours.nl). The desitination was the National Veteraan Treffen in Woerden (see last picture) – www.nationaalveteraantreffen.com – the number and variety of classic bikes on display was fantastic. It was also a swap meet with dozens of stalls but mainly for the old 50cc mopeds and smaller motorbikes up to 125cc.

During the ride we stopped every half hour or so and swapped bikes to experience the various veteran bikes on offer including 2 Laverda’s. The smoothest was the Kawasaki, still running like a turbine (naturally – ed.) and the most exciting the Laverda. Just have to keep in mind that the gear shifter is on the wrong side. We travelled a total of 230km using all type of back roads (30km, 50km, 70km, 80km speed limits) to stay away from the freeways, and the Dutch scenery was beautiful with a little rain for only a few minutes to remind me I was riding in Holland.

Could you forward this on to our members, see you in a few weeks.

Better than that Robert, your pictures are on the Branch Blog; Roberts pictures from the Tour follow:

2013 Yamaha FJR1300A

Yamaha has unveiled for the 2013 FJR1300A, including restyled bodywork, ride-by-wire throttle control, new instrumentation, and the addition of traction control.

Starting at the front, the FJR’s menacing cat-eye headlights now have LED daytime running lights, a la Audi’s A series cars. The front fairing is restyled for improved aerodynamics as well as a sleeker but more aggressive appearance.

New, smaller faired-in LED turn signals replace the incandescent bulb signals on the previous model, while new leg panels feature a tool-less adjustment that allows for redirecting hot air from the engine compartment away from the rider’s knee and lower leg area.

Most significant of the changes to the front is a wider, more rigid windscreen operated by an all-new motor that raises and lowers the shield at twice the rate as the previous shield, according to Yamaha. And, bonus, the screen now remains in position when the ignition is off, rather than defaulting to the down position, as was the case on the previous model.

A new dashboard includes an analogue tachometer joined by a digital LCD speedometer, as well as an LCD info panel that features three display screens. The info panel is customisable, allowing the rider to select various data displayed (ambient air, odometer, trip meters, instantaneous fuel usage, average mpg, coolant temp, etc.) in whatever order the rider chooses.

Switchgear is updated to include electronic cruise control, and the starter button is integrated with the start/stop switch. Heated grips carry over from the previous model but now allow the rider to select temperature ranges for each (high, medium and low) of the settings.

Yamaha’s Chip Controlled–Throttle (YCC-T) has been a feature on the R6 and R1 for several years, and for 2013 it makes its way on to the FJR. The throttle body is redesigned, and the shape and length of the exhaust pipe have been changed to suit the YCC-T system. Yamaha claims smoother throttle response from YCC-T, and on the sport-tourer it will integrate with electronic cruise control and Yamaha’s two-mode (sport and touring) drive-mode selector, called D-mode — both new features for 2013.

Rounding out electronic rider aids is a simplified, single-level traction control system that works on a similar premise (cuts ignition, as well as the throttle valve and fuel) as the TC found on the Super Ténéré, according to Yamaha’s Mike Ulrich. Although the FJR lacks the Super T’s three-level TC, the FJR rider can, if desired, disable traction control altogether.

Finally, the fully adjustable 48mm fork receives a new aluminium piston rod and plunger and new spring rate, while the shock’s damping and spring rates are revised. The modest suspension tweaks are claimed to improve the FJR’s sporty handling without compromising ride comfort.

A quick specification chart comparison between the 2012 and 2013 models reveals the new model has shed 3 kg from the previous bike’s fully fuelled, ready-to-ride weight of 293 kg.

Yamaha staff said the bike’s engine received a number of minor updates and refinements but declined to go into detail at the time of the FJR’s unveiling.

Although the FJR’s 2013 updates are more akin to a mid-cycle revamp, they are worthwhile, functional improvements that only add an insignificant USD300 to the previous bike’s RRP.

Source: Motorcycle(dot)com (http://www.motorcycle.com)

2013 BMW R1200GS

Details of the 2013 MY BMW R1200GS have recently been released. A brief summary and some pictures follow:

Highlights of the new BMW R1200GS according to BMW:

  • Completely re-engineered for the ultimate in driving dynamics in Enduro segment.
  • 1170cc displacement, maximum power 125 hp (92 kW) at 7700 rpm and maximum torque 92 ft-lb. (125 Nm) at 6500 rpm.
  • Vertical-flow cylinder heads for even more efficiency and performance.
  • Compact air-water-cooling for optimal heat management.
  • Basic engine with a compact, lightweight and yet optimized for stiffness crankshaft.
  • Vertical split case in open-deck construction.
  • Integrated in the engine case six-speed transmission with wet clutch with anti-hopping function and reduced manual force.
  • New intake system with 52mm throttle body for optimum power and torque curves.
  • E-gas for improved rideability, refinement and presentation of special functions.
  • Innovative exhaust system with electronically controlled exhaust flap for optimum power and performance and pithy boxer sound.
  • User-selectable driving modes “Rain”, “Road”, “Dynamic”, “Enduro” and “Enduro Pro” with three different drive-by-inputs, in connection with ASC (Automatic Stability Control), ABS and ASC settings for off-road use as well as different Dynamic ESA settings for each mode (optional equipment ex works).
  • New chassis with torsion stiff tubular steel bridge frame and bolted subframe.
  • Newly laid out lightweight shaft drive, placed on the left side.
  • Newly developed, optimized front Telelever and EVO Paralever rear for even more precise riding feel.
  • Refined chassis geometric data and long swingarm for best traction.
  • Optimized seat width and position, and adjustable handlebars for more comfort.
  • Improved seat height for rider (step length).
  • Specially designed for the R1200GS tailored wheel tire dimension of 120/70 R19 front and 170/60 R17 at the rear as a world first.
  • Revised BMW motorcycle brakes with radial-mount Monoblock calipers at the front and Brembo two-piston caliper with larger rear brake disc (Ø 276 mm, 265 mm previously).
  • BMW Motorrad Integral ABS as standard.
  • Dynamic semi-active suspension (ESA optional equipment ex works).
  • Headlights with optimized light output and LED daytime running lights (optional equipment ex works).
  • World’s first motorcycle headlights with LED technology with integrated daytime running lights (optional equipment ex works).
  • New electrical system with new partitioning of the feature sets.
  • Advanced electric switch units.
  • Electronic cruise control (optional equipment ex works).
  • Preparation for navigation device with multi-controller to operate the BMW Motorrad Navigator IV (optional equipment ex works).
  • Windshield with hand operated adjustment for best wind and weather protection.
  • Multi-adjustable seat for perfect ergonomics.
  • Quick removable license plate holder for off-road applications.
  • Increased ground clearance (+8 mm).
  • New instrument cluster with standard on-board computer. PRO-board computer as an option.
  • Four main colors: Alpine White, Racing Red, Blue Fire, and Thunder Grey metallic.
  • Wide range of optional accessories and rider equipment.

Source: BMW Motorcycle Magazine (http://bmwmcmag.com)

    A well-planned retirement…

    Outside England’s Bristol Zoo there is a parking lot for 150 cars and 8 buses. For 25 years it’s parking fees were managed by a very pleasant attendant. The fees were £1.40 for cars and £7.00 for buses. Then, one day, after 25 years of never taking a day off work the parking attendant just didn’t show up for work. The Zoo management contacted the Bristol City Council and asked if another parking attendant could be provided.

    The Council staff did some research and replied, telling the Zoo that the parking lot was its own responsibility. The Zoo replied that the attendant was a city employee. The City Council responded that the parking lot attendant had never been on the City payroll.

    Meanwhile, sitting in his villa somewhere on the coast of Spain or France or Italy is a man who’d apparently had a ticket machine installed, completely at his own expense, at the Bristol Zoo, and then simply begun to show up every day to re-stock the machine with tickets and collect the parking fees—estimated at about £560 per day—for 25 years. Assuming he did this 7 days a week, this amounts to just over £7 million—and nobody knows his name.

    Nominations for positions on the National Committee for 2013

    The National Secretary of the Ulysses Club has asked that we make members aware of the following notice:

    NOTICE

    Ulysses Club Inc.
    National Annual General Meeting 2013

    Nominations for positions on the National Committee for 2013 must be received by the National Secretary by November 30, 2012.

    Nominations should be addressed to the National Secretary and sent to:

    Ulysses Club Inc. Administration Office
    PO Box 3242
    NARELLAN NSW 2567

    Please note that all nominations must be in writing and need to be signed by the Proposer, Seconder and Nominee, who must all be financial members of Ulysses Club Inc. Please request a copy of the Nomination form from secretary@ulysses.org.au

    2013 Ulysses Club AGM

    The Fraser Coast Branch has sent a letter to all Ulysses Club  members inviting them to attend the 2013 Ulysses Club AGM. The begining of the invitation reads:

    On behalf of the Fraser Coast Branch of the Ulysses Club, I would like to take this opportunity to invite each and every one of you to attend the forthcoming AGM Event, which is being held on April 15th — 21st 2013, and will be based in Maryborough, which is only 250 km north of Brisbane.

    Click here to read the letter in full.

    NSW Government and us!

    The Ulysses Club has representatives on the Motorcycle Council of NSW and has input into the Council’s on-going deliberations with the NSW Government (through Transport for NSW – T4NSW). The Council’s latest newsletter has been distributed to all Ulysses branches and contains a number of important issues for motorcyclists in NSW. Below is a summary of these issues:

    GIO No Pillion Issue

    Mary Hawkins the Acting Deputy General Manager of the Motor Accidents Authority has responded to our queries to the MAA on behalf of riders about the sudden appearance on GIO CTP renewal forms relating to the carrying of pillions.

    As a result of your representations advising the confusion being created for motorcyclists, GIO is undertaking the following actions:

    • Additional information and training to customer enquiry staff about the gathering of this data on pillion passengers so that they are better equipped to answer queries from motorcyclists;
    • Modifying the letter sent with Renewal Notices to explain more about what is being asked of the motorcycle owner. This will read as follows: À new factor has been introduced to identify if the Motorcycle usually carries a pillion passenger. As we did not have this information for existing policy holders a default value of “No” has been applied and appears on your Green Slip. If this is not correct, please contact us to update your policy. At this stage there is no impact on your premium. Note: If you indicate “no” but unexpectedly carry a pillion passenger, you will still be covered by your CTP Green Slip”.

    I trust this will clarify the issue for you and you will be in a position to advise your members of GIO’s intention and how they should respond in relation of the renewal notices.

    Vehicle Standards Working Group update

    Transport for NSW announced at the Vehicle Standards Working Group meeting on Thursday the 19th July that they will drop their proposal requiring Engineering Certification of after-market motorcycle exhausts. T4NSW had included this requirement on the gazettal list proposed for the Roads Minister’s signature, meaning this would have come into effect in the near future. Had this gone through it would have led to another rash of bookings similar to the “Exhaust Sticker” issue defeated by the MCC in 2006 and would have required all riders to have their exhausts checked for suitability by an approved engineer after you had fitted a new exhaust to your bike. Transport for NSW representatives advised this proposal is to be deleted from the gazettal list following on from rather exhaustive negotiations between the MCCofNSW and Transport representatives by Teleconference on the 9th of July.

    NSW Helmet laws

    As it currently stands the Australian Competition and Consumer Commission (ACCC) monitor the Helmet Standards in Australia. All helmets for sale in Australia are required to meet the Mandatory Standard AS1698:1988 and can be certified by any number of Conformance Assessment Boards or CAB’s. Recently introduced legislation in NSW means you are only allowed to wear a helmet certified by four of these CAB’s.

    So how does this affect me I hear you ask — right now you can go online and purchase an AS1698:1988 certified helmet from an online store based in say Adelaide. This helmet is deemed suitable by the ACCC as safe and good to be sold. If it has the wrong sticker on it you will get booked by the boys in blue in NSW because Transport for NSW don’t think the ACCC can get it right. Not only will you get booked, but you will lose points and if it is a double demerit weekend and you and your pillion are wearing a helmet with the wrong sticker on it you can and will lose your license. This also effects riders from interstate when passing through the glorious state of NSW to the GP or on a road trip. The information gleaned from this meeting is that Transport for NSW are not going to change their position on the recently introduced road rules and will not repeal them, leaving us, the rider, responsible for monitoring which sticker we have on our perfectly legal and safe helmets. Any riders that have recently been booked for a helmet offence could you please contact the MCCofNSW via email on enquiries@mccofnsw.org.au

    Further reading can be found at http://www.roadrider.com.au/special-features/state-of-helmets

    Other matters

    • The Motorcycle Council has been asked by Western Region Road Safety Officer to highlight a corner on Bylong Valley Way which has seen a significant number of single vehicle motorcycle crashes lately. It appears to be a tightening radius corner with loose gravel on it and poor signposting. Please report any feedback via enquiries@mccofnsw.org.au
    • Any Harley riders who feel they have been given undue and persistent attention by the NSW Police are asked to get in contact with David Golledge mulea@bigpond.com or direct information to the Chairman@mccofnsw.org.au with details please.
    • The Classic & Enthusiasts Motor Cycle Club of NSW Inc will be holding its annual show on Sunday 23rd September 2012 at Cooper St Reserve, Engadine. This will be the 13th year at this venue. All motor cycle enthusiasts are invited to attend and enter the event. Trophies will be awarded in various categories from Veteran and Vintage to Modern, as well as competition machines. More information on the event is available at the club’s website – www.cemcc.org.au

    Click here to download a copy of the MCCofNSW Newsletter.

    Historical Re-enactment of the 3rd Circuit Ospedaletti

    The Italian Historical Automotoclub will be staging the Historical Re-enactment of the 3rd Circuit Ospedaletti in Italian town of Ospedaletti from Friday, 31st August to Sunday, 2nd September this year.

    Now this post was not included here to let you know about this event – NO! It was included here to show you several pictures of a great motorcycle racer who will be taking part at Ospedaletti. This bloke:

    That’s really pretty!